• Fit Commercial Or Milspec tube
• No Gun Smithing required
• Simply remove your stock, slide the adapter down over the tube nut, tighten with supplied Allen wrench and then it's done.
• High-durability aluminum alloy in black matte
• Easy Install,
Ambidextrous, quick-detach sling swivel can be mounted on either side of the mounting plate on adjustable M4-type buttstocks so you can position your sling for optimum comfort and versatility. Hard coat anodized, 6061 aluminum body with a matte black finish holds up to the toughest use and won't crack or break over years of shooting. Won't interfere with the operation of stock and works well with single-point, two-point, or three-point tactical slings.
Made of Aircract T6 6061 Aluminum, includes Free BarreI nut
Color : Black Anodized
A Steel Barrel Nut Included
Barrel Nut inside diameter : 1.02'' (26 mm)
Barrel Nut outside diameter : 1.35'' (34.4 mm )
Barrel Nut Thread Spec.: 1-1/4-18 UNC
Fit .223 / 5.56 Rifle
Super Slim M-LOK Handguard Rail
Easy to instal
Weapon compatibility: All
Superior Material : Carbon-Steel
This accessory mount is designed to mount your scope or tactical light directly to your barrel .
This Dual Laser Mount can securely hold your laser directly to the gun barrel
Easy to tighten clamp style knob
It’s a standard 3.25" AR-15 carbine buffer machined from high strength 6061-T6 aluminum.
It contains 3.0 oz of weights and is topped with a standard rubber bumper.
The lightweight and durable 6061-T6 aluminum 6 position receiver extension is proper mil-spec dimensions to accept a wide variety of market stocks.
A coated carbine spring and 3oz buffer help ensure smooth and reliable function.
Kit includes end plate, castlenut, buffer tube, carbine spring, and buffer.
Machined from impact extruded 7075 aluminum with durable hardcoat anodized finish.
Extended bottom lip helps to reduce carrier tilt.
This six position tube is compatible with all MIL-SPEC carbine stocks.
• Integral Picatinny Mounting Deck to Fit All Flat Tops
• Dual Aiming Apertures for All Shooting Requirements
• Precision Windage Adjustments
• Clever and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions
• User Friendly Locking Thumb Nut for Easy Installation
• Precision made flip-up A2 front sight. This front sight will fit lower gas blocks.
• A2 front sight is fully adjustable for elevation.
• Front sight post fold down out of view of your optics when not in use.
• Large steel thumb nut and precise rail clamp for positive & secure attachment to your upper receiver.
Precision made A2 front sight. The mount and front sight post is made from high quality aluminum and steel.
Made of good quality aluminum, lightweight and durable.
1/2 MOA elevation and windage adjustment
Same height above bore as standard-issue M4/M16A4 sights
Low-profile sights extend only 0.2 inch above top rail.
Backup sights mount at 45 degree offset
• Quick Detachable. Front Sight with Adjustable A2 Square Post Assembly
• Fit All Picatinny /Weaver Style Rails
• Precision Elevation Adjustments to Enhance Shooting Accuracy
• Profile Designed for Installation on Gas Block
• Height: 1.73 IN; Width: 1.57 IN; Length: 0.83 IN; Weight: 1.4 OZ
•All metal durable construction
•Low profile design
•Adjustable windage and elevation adjustments
•Water-proof fog-proof and shock proof
•For pistols or handguns, 20mm picatinny rails
• Fit into most Gun: The Weaver Rail of Inlook Red Dot Laser Sight is Picatinny 20mm Standard size
• Higher Accuracy: Inlook Red Dot Laser Sight Adjust to windage and elevation for day & night shooting. It is anti-vibration, fog-proof and shock-resistant
• Long Endurance Life: with its covering is made from high-strength Aluminium Alloy and undergoes anti- corrosive treatment. so it has a good Endurance Life.
• Portable to take: its Size is 2.4" x 1.15" x 0.85" or 60mm x 29mm x 23mm.Weight with Battery is 1.65 oz. Voltage: 3 x 1.5v LR44 Batteries.
• Further to see: Laser Range : > 100m at night
Mil-Spec receiver end plate for AR-15 carbines.
Made of steel
CNC machined construction
Black manganese phosphate coated to MIL-SPEC to prevent corrosion, rust, and wear.
The QD Endplate is precision CNC machined from Aircraft Grade Aluminum and anodized for long lasting durability.
The QD socket features an Anti-rotation design and the swivel is included.
A replacement for the standard AR-15 endplate featuring CNC machined construction from a single piece of laser-cut billet steel and black manganese phosphate coated to MIL-SPEC to prevent corrosion, rust, and wear.
The QD sling swivel socket is rotation limited and centrally located for easy ambidextrous use without having to worry about sling wrap-up!
High quality durable steel construction
Designed to allows QD sling swivel attachment on both left-hand side and right-hand side
Direct replace the manufacture's part of GBB M-4 / AR15 stock receiver end plate
Fits on all 20mm weaver 1913 MIL-STD picatinny rails
Including twin sling loops for ambidextrous attachment
Made of steel
CNC machined construction
Black coated to MIL-SPEC to prevent corrosion, rust, and wear.
Designed to give a shooter over 180 degrees range of motion of the sling attachment point and can be used ambidextrously by both left or right handed shooters.
This sling mount gives the shooter a tactical advantage allowing a full range of motion and minimizes binding while switching shoulders.
• hunting rifle bipod mount made of durable Aluminum alloy material
• Rotatable sling stud built in is perfect for attaching to sling swivels
• Allows for the mounting of Harris Style Bipods to rifles
• Works great with Harris bipods, folding bipods or most other bipods that mount onto standard sling stud
• Easy to install, convenient to use
Material: Aluminum Color: Black Weight: 62g Size: Approx. 60x35x13mm
1. Made of Aluminum material
2. Durable Design to Convert Swivel Stud into 1-Slot Picatinny Rail for Bipod Installation
3. Provides Alternative Swivel Stud For Sling Swivel Attachment
4. Easy to install Suitable for 20mm rail
ABOUT KE YANG
Keyang Metal Manufacturing Factory, founded in 1999, is located in Nantong, Jiangsu Province. Concentrating the design, development, production, sales on its own, it predominantly produces gun-sight mounting systems, as well as the spare parts and accessories. Besides, we provide professional customized OEM service for many renowned outdoor equiment companies.
Equipped with multiple worlds’ advanced production lines, we export the buckles, mounting systems and rails direc...