KE YANG 1" Offset Picatinny/Weaver Rail Mount for Flashlights

• Offset rail mount for mounting flashlights to rail equipped rifles or shotguns • Mounts to any standard Weaver or Picatinny 1913 rail, with the flashlight offset to the side • Attaches and easily via integrated quick release mechanism, without additional tools or tightening • Crafted from high quality, lightweight aluminum

KE YANG 1" Offset Picatinny/Weaver Rail Mount for Flashlights with Quick Release

• Offset rail mount for mounting flashlights to rail equipped rifles or shotguns • Mounts to any standard Weaver or Picatinny 1913 rail, with the flashlight offset to the side • Attaches and detaches quickly and easily via integrated quick release mechanism, without additional tools or tightening • Mount is 1" in diameter, 1.8" in length, 1.6" in height, and 1.6 ounces in weight • Crafted from high quality, lightweight aluminum

KE YANG 5 Position Shotgun Barrel Mount

• 12 Gauge Shotgun 5 Position Barrel Mount. 5 Attachment Points. 3 Picatinny Rails Per Side. • Fits Onto Most 1" Diameter Extended Shotgun Magazines Tubes. Heatshield Will Not Affect Mounting. • This Mount Provides You with 3 Fully Capable To Use Weaver Picatinny Mount with 5 Different Angles To Choose From. Angles of 3, 6, 9, 4:30 & 7:30. • Perfect for Attaching Grips, Bipods, Flashlights and Lasers to your weapon, any three at the same time. • T6 6063 Aluminum Construction. Milspec Type 3 Hard Coat Anodized Finish. Easy Installation.

KE YANG Model 4/16 Complete Match-grade Rear Sight

• Model 4/15 comes with a one piece integral picatinny mounting deck fits all flat tops and is equipped with a locking retention thumb nut. • Exact height designed to co-witness with a standard front sight and most electronic dot sights • Features two adjustable apetures for both cloase quarters and precision shooting • Precise MOA Windage and Elevation Adjustment, Complete with Dual Aiming Apertures and Precision Windage

KE YANG Riflescope Picatinny Mount for 1 Inch Tube

 Allows for correct shooting technique and proper Height, Eye Relief and Forward Position for Charging-Handle Access on Virtually Any Rifle  Strong-Yet-Lightweight Alloy Construction  For One Inch Tube Diameter Riflescopes, Fits flattop picatinny rails  Reversible 2-piece design for proper mounting height and proper fore-aft position  Reversible for use with ultra compact scopes.  Perfect Mount for Standard Size Scopes.

KE YANG Professional Steel Round Bottom Dovetail Rail Base 10mm Airgun Sight

• Round Bottom, for rifle without a mount base • Mount Rail Width: 10mm • Weight: 50.8g • Length: 115mm • Rail width: 20mm

KE YANG Low Profile Picatinny Riser Mount with Quick Release, for Red Dots, Scopes, and Optics (0.5 inch H x 2.5 inch L)

• Low profile riser mount for red dots, scopes, and optics, allows for sight clearance over front sights • 0.5 inch of rise, Picatinny rail mount, will accommodate Picatinny or Weaver standard red dots and optics • Attaches and detaches quickly and easily via integrated quick release mechanism • Sturdy and lightweight, crafted from aircraft grade 6061 aluminum • Available in 1.5 inch (3 Picatinny slots) and 2.5 inch (5 Picatinny slots) versions

KE YANG Black Tactical KeyMod Rail Attachment QD Sling Swivel Base Mount Adaptor KeyMod Modular

• This QD sling swivel mount is made of high-tensile aluminum alloy, ensure maximum durability under heavy use • Easy to use this QD sling swivel mount, simply push button to quickly detach and attach sling

KE YANG 1/2" 3 Slot Low Riser 20mm WEAVER PICATINNY Rifle Base/Scope Mount Rail

 Material:Aluminum Alloy  Rail Type:Fit any 20mm weaver/picatinny base  Height:1/2"(from the center of ring to the bottom)  Length:Approx 33mm/1.3"  Get extra height for optimal sight alignment. The 1/2-Inch Picatinny Riser is ideal for AR and M16 receivers and other tactical rifles

KE YANG Low Profile Scope Mount Rings Weaver Style High Rise See-thru for Weaver Rail Mount

• 1 inch diameter scope rings for mounting standard 1" tube rifle scopes • Low profile in height, light weight aerospace aluminum construction • See through channel at the base of the rings allows for simultaneous use of low profile front sights

KE YANG Picatinny Rail 11mm Dovetail to 7/8" 20mm Weaver Rail Snap-in Adaptor Scope Mount

1. Easy Installation with Most Dovetail to 20-22mm Picatinny/Weaver Rail Adaptor 2. Rail system: 11mm Weaver Rai; Work type: Ring Converter 11mm to 20mm 3. Innovative Rail Platform to Convert Most .22/Airgun Rails Including 1 pc of adapter rail mount and 1 pc of wrench; 4. Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base 5. Durable and solid Precision and Repeatable Alignment Top Slot with Spring Tension Retraction Easy to install and remove

KE YANG light mount dovetail scope mount to picatinny adapter weaver picatinny rail mount 11mm to 20mm Accessories 9.0 In for Airsoft Guns Airgun Rifle Sports Outdoors Hunting Shooting

• light mount Hammers Crossbow Airgun Scope Rail Adapter Riser Dovetail to Weaver Stop Pin Picatinny Extend 10mm to 21mm 9.0 In Tactical dovetail Scope Mount. • Dovetail to picatinny adapter have grind notch in the mount and used the original sight pins to keep the mount from moving forward with every shot. • Dovetail mount has a locking grub for springers and heavy recoil so they don't make the rail move back,it had three screws to clamp it.

KE YANG 30mm Low Profile scope Mount Ring fit Standard 20mm Weaver Picatinny Rail Scope Mount Heavy Duty 6 Bolts Hunting Accessories

Description: Aluminum alloy construction in matte black finish Heavy duty shock proof 6 bolts ring design Fits 30mm scopes, lasers and flashlights Quick release nut allows fast installation and detachment Fits standard 20mm Weaver / Picatinny rail Specifications: Weight: 80g Height: 38mm (23mm from rail base to center) total height(from top to bottom):4cm Package Include: 2 x 30mm scope ring 2 x allen wrench

KE YANG 2pcs 25.4mm Ring 11mm Dovetail Rail 3/8" Mount High Profile Rifle Scope Mounts Hunting Accessories

Description: Fits all scopes with a one inch body tube Fits 3/8" dovetails mounts, rails and bases. Made of solid aluminum alloy to withstand shock and recoil Complete with stop pin and solid locking device. 4Hex screws on top to tightly secure the scope Specification: Ring Diameter: 1inch/25.4mm Weight:120g Center Height:26.8mm Material:aluminum alloy matte black

KE YANG Military Tactical AR15&M16 20mm Scope mount Weaver Rail for Carry Handles Airsoft Shooting Hunting Gun Rifle Quick Release Tool

• Great for Marui G3A3, G3A4, G3SG1, MP5A4, MP5A5, MP5SD6 & MP5SD5 or Classic Army CA33E • Fits all standard 20mm scope rail • Quick Release & Easily Install

KE YANG Replacement Camming T-Nuts - Hardware for M-LOK Rail Systems - Set of 10

• Fits ALL guns configured for M-LOK mounts • Replacement Hardware

KE YANG 5-Slot M-LOK Picatinny Section Rail, Black

• 6061 aluminum construction, hard anodizing finish, 5 slots sections • For using on all m-lok mounting surfaces • Includes steel locking nuts, steel Allen screws and Allen wrench for installation

KE YANG KeyMod Offset 1" Flashlight Mount

• Black color. Clamps on and mounts to any key mod standard mounting platform. Constructed of aircraft grade aluminum • Offset design allows for more flexible hand or accessory placement without obstruction of Flashlight beam • This mount is Compatible with most common flashlights which have a 1 inch diameter Battery tube. Comes with mounting screws, nuts and Allen wrench • Key Mod Offset Flashlight mount Assembly

KE YANG 70223 QD Quick Release Sight Rail Mount, Aluminum Alloy Tactical Side Mount

• For Airsoft. Includes 1x side scope mount for AK, 1x L wrench key for adjusting the center pin • Made of aircraft grade aluminum alloy • QD design, no screws needed. • Easily add scope rail mount base to your AK series AEG with side rail on the receiver


Keyang Metal Manufacturing Factory, founded in 1999, is located in Nantong, Jiangsu Province. Concentrating the design, development, production, sales on its own, it predominantly produces gun-sight mounting systems, as well as the spare parts and accessories. Besides, we provide professional customized OEM service for many renowned outdoor equiment companies.
Equipped with multiple worlds’ advanced production lines, we export the buckles, mounting systems and rails direc...


+86 13815201858
+86 15722511161